Sound2 ZT51000 User Manual Download Page 5

4

C. Safety Information

Do not expose the speakers to rain, moisture or any liquid.  Exposure to liquid or moisture may cause 

the speakers to fail and increase the risk of electrical shock or fire. 

Do not expose the speakers to open flame, such as candles,  camp fire, etc.

Under no circumstances should the users make any change or modification to the product or its 

accessories.  Any changes made may compromise safety, affect the performance of the product and 

void the warranty.

In case the battery begins to leak, do not allow your body parts to come in contact with the liquid, If 

contact has been made, please wash with plenty of water and seek medical advice.

Do Not expose the product to excessive heat, such as inside a car under direct sunlight where 

temperature may exceed 140˚F (60˚C) degrees.  Battery under extreme heat may generate more 

heat, rupture, or ignite.  Storing the speakers under such condition may result in degradation in 

performance and shorter battery life.

This product contains magnets, which can be harmful to persons wearing pacemaker.

Hearing damage can result from prolong exposure to loud music,  please turn down the volume.

The speakers contains lithium batteries, please dispose the speakers properly, following local 

regulations.  Do not incinerate.

Summary of Contents for ZT51000

















Reviews: