Sound-X SMI-1410, User Manual

Page: 9 / 52

[1] CHORD
[2] STYLE
[3]
[4] START/STOP
SYNC/FILL-IN
[5]
[6]
[7] TEMPO VOLUME
[8]
CHORD NORMAL
START/STOP
Repeatedly press until a black dot appears next to S. FINGER on the left
side of the display.
Press .
Enter a two-digit auto-style number.
To begin the auto-style before the auto accompaniment, press . Or,
to synchronize the start of the selected auto-rhythm with your accompaniment, press
.
Begin the accompaniment at the desired interval by pressing the desired
accompaniment key(s).
To play a melody along with the accompaniment, press any key(s) to the right.
Adjust the and to the desired level.
To change chords without interrupting the style, simply press the auto
accompaniment key(s) required to form the new chord. The name of the chord appears
on the display. To stop auto accompaniment but not the auto-style, repeatedly press
until the black dot appears next to on the display. Or, to stop auto
accompaniment and the auto-style, press .
E09
To turn on the keyboard’s metronome, press voice or style, then press . The
metronome’s bar swings along with the tempo you selected, and the corresponding
beat appears. Press
again to turn the metronome off.
METRO
METRO
When the metronome is on, repeatedly press BEAT until you hear the desired beat to
adjust it. 9 beats (00.02-09) are available and can be selected at regular intervals. The
beat number you selected appears.
Using the Metronome
Using Beat
Single Fingering
ENGLISH
The standard fingering method uses standard formations of three or more notes, and
lets the experienced musician play a wider variety of accompaniment chords.
Follow these steps to start standard fingering auto accompaniment.
[1] Repeatedly press CHORD until a black dot appears next to FINGERED on the left
side of the display.
[2] Follow steps 2 - 8 or Single Fingering.
Standard Fingering