OPERATION
Operation
dB
dB
dB
dB
dB
dB
dB
Quick Setup Guide
1. Connect the SWM26 receiver to an AC outlet through the power adapter provided.
2. Connect the SWM26 receiver to a powered speaker or an amplifier with the 1/4" audio cable provided.
Turn on the SWM26 receiver. (If you are connecting the receiver to a passive speaker, mixer, home
receiver or television, please refer to the connection diagram section).
3. Insert two alkaline AA batteries into the battery compartment of the microphone. Make sure the positive
and negative ends are facing the correct direction. Power on the microphone.
How to Select or Adjust Receiver Frequency
*Note: Please make sure the system is unlocked before adjusting system frequency. Long pressing the set
button will lock or unlock system settings and the lock or unlock icon will display accordingly on the screen.
1. Automatic Frequency/Channel Selection: Press and hold "DOWN " until " " displays. Then the
best frequency will be selected.
2. Manual Frequency/Channel Selection: Press and hold "UP " on the receiver until the channel blinks.
While the channel is blinking, press "UP " or "DOWN " to select the desired channel. Then press
"SET" to confirm the channel.
POWER
dB
dB
VOL+
VOL+
VOL-
VOL-
dB
dB
Synchronize Frequency between Receiver and Microphone
1. Point the Infrared Receiving Window (IR port) of the microphone towards the receiver s IR port.
'
2. Press the "SET" button and " " will display on the LCD screen. Once syncing is completed,
the "RF" level bar appears and the "MUTE" icon disappears.
How to adjust the volume on the receiver
*Note: Please make sure the system is unlocked before adjusting system volume. Long pressing
the set button will lock or unlock system settings and the lock or unlock icon will display accordingly
on the screen.
Short press the "UP " to increase the volume or short press the "DOWN " to reduce the volume.
Please make sure that the
other handheld microphone is powered
off when adjusting the frequency on one
microphone.
.
Please adjust the receiver to a different
frequency shall you encounter interference.
Please refer to the section above on how
to adjust receiver frequency.
dB
dB