Sound Storm SDC22A, User Manual, Page: 8 / 12

Turn on/off the unit
Sound adjustment
Turn on the unit by pressing any button
(except
button (1) and button (4)) or
inserting a disc to disc slot (18).
When system is on, press the
button
(2) to turn off the unit.
- Rotate the knob (9) to adjust the
volume level.
Press the
button (9) repeatedly
to cycle through the following sound
adjustment choices:
VOL+/-
SELECT
Rotate the knob (9) VOL+/-
SELECT
SELECT
to adjust the
desired sound quality.
- Press and hold the
button (9)
to enter the menu mode. Once you are in
the menu mode, press the
button (9) repeatedly to cycle through the
following setup choices:
Rotate the knob (9) to preset
♦ BEEP ON/OFF:
♦ 12/24 Hour: These options allow you to
choose 12 hour or 24 hour display.
VOL+/- the
desired item.
- BEEP ON: The beep sound is heard
when a key is pressed.
- BEEP OFF: The beep sound is disabled.
♦ P-VOL: This option allows you to preset
a volume level (volume level when the
unit switches on).
♦ CLK ON /CLK OFF : These options
allow you to choose wether show the
clock on the LCD display or not.
Press and hold the button
(8) to engage the loudness mode to
reinforce the output of bass frequencies.
Loudness function
BAND/LOUD
The car audio device is
equipped with the beep tone on and beep
tone off function,
Press and hold again to turn off loudness.
Press the (13) to show current
information and time on the LCD. R
Displaying/Adjusting time
1. Displaying time:
DISP
eturn
to original status after 5 seconds.
Press and hold (13) until the clock
begins blinking. Rotate the knob
(9) counter-clockwise to adjust hour and
rotate it clockwise to adjust minute.
In radio or AUX mode, press the
(3) to silence the sound instantly. Press it
again to return to previous volume level.
Press button (16) repeatedly to cycle
through the following equalization mode
choice:
2. Adjusting time:
DISP
VOL+/-
MUTE
EQ
Mute function
Equalization
LCD
Flashing LED
RESET FUNCTION
Exhibits current frequency and activated
functions on the
(19).
The LED (21) will flash if the front panel is
not inserted properly into the main unit.
The button is to be activated for
the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note:
f you press
button and the unit still does not
LCD
RESET
RESET
RESET button (20) must be
activated with either a ballpoint pen or
thin metal object. I
work,
please use a cotton swab soaked in
isopropyl alcohol to clean the socket on
the front panel.
SDC22A User ’s Manual - page 7