Sound Storm MCK508WB.6 User Manual Download Page 7

5

GENERAL OPERATION

Turn Unit On/Off

Press the power ( ) /SRC button to turn on the unit. Press and hold it to turn off the unit.

 

Press the power ( ) button on the remote control to turn the unit on or off. 

 

Adjust Volume (VOL)

Rotate the 

VOL

 knob on the front panel or press the 

VOL+/-

VOL+/-

VOL

 button on the remote control to 

increase or decrease the volume level.

Adjust Menu Options (SEL)  

•  Press the 

•  Rotate the          knob on the front panel or press the                button on the remote contol

to adjust the selected item. 

SEL

 button repeatedly to cycle through the following adjustable audio functions: 

BASS, TREBLE, BALANCE, FADER, EQ OFF, LOUD OFF, DX, STEREO and VOLUME.  

•  Press and hold the 

SEL

Set the Clock (CLK)

1. To display clock time, press the 

CLK

 button.

2. To set clock time, press and hold the 

CLK

 button and the hour will 

 

3. Press the 

I<<

 or 

>>I

  button or press the 

NEXT

 or 

PREV

 button to adjust the hour.

Press the 

I<<

 or 

>>I

  button or press the 

NEXT

 or 

PREV

 button to adjust the minutes.

4. Press the 

CLK

 button and the minutes will

5.

6.

 

During Bluetooth mode, the clock can not be adjusted.

Change the Source (SRC)

Press the 

SRC

 button to switch between RADIO, BT, DISC, USB and AUX-IN modes.

Loudness on/off (LOUD) 

Press the 

LOUD

 button on the remote control to turn on the loudness to reinforce the output

of bass frequencies, press again to turn it off.  

Preset Equalizer (EQ) 

Press the 

EQ

 button on the remote control to choose a desired preset equlizer mode: OFF, 

FLAT, POP, ROCK, CLASS.  

Mute on/off (MUTE) 

Press the 

MUTE

 button on the remote control to toggle mute on or off. The muted state will

be also released, when the volume knob or 

VOL+/-

 button are used.

Reset System (RESET)

 button to access these additional functions: VOL (LAS/ADJ),

AREA EU/US, Clock 12/24, and BEEP ON/OFF. 

The 

RESET

 button is used to reset all parameters to factory default settings.

This function may be used when the LCD does not display normally or sound is distorted, 

or when any of the controls are disabled. To reset your system, use a thin object with a 

pointed end to depress the 

RESET

 button.

Summary of Contents for MCK508WB.6

















Reviews: