12
APPENDIX A: SETTING THE MIDIUP CHANNEL NUMBER
The MidiUp is factory set at channel 16. This channel will work fine for most applications. If you need to
change the channel number to a value other than this you will need to change the settings of the channel
switch inside the unit.
A situation that would require this is if you are using more than one MidiUp together in which case one
should be left at the factory setting, the next set to another channel such as channel 15 and so on.
To access the switch, remove the two screws on the front of the unit and slide the cover away from the
front panel to expose the circuit board. The switch is labled with the numbers 8 4 2 1 below the switch.
Refer to the following chart to set the values. Note 0 = switch off. 1 = switch on. In the chart “CHAN
represents the desired channel and “8 4 2 1" refers to the settings of the 4 switches.
CHAN 8 4 2 1
CHAN 8 4 2 1
CHAN 8 4 2 1
CHAN 8 4 2 1
1 0 0 0 0
5 0 1 0 0
9 1 0 0 0
13 1 1 0 0
2 0 0 0 1
6 0 1 0 1
10 1 0 0 1
14 1 1 0 1
3 0 0 1 0
7 0 1 1 0
11 1 0 1 0
15 1 1 1 0
4 0 0 1 1
8 0 1 1 1
12 1 0 1 1
16 1 1 1 1
