Sound Pro NDS-1210, Instruction Manual

Page: 4 / 8

1. To prevent damage to the microphone, do not turn on
the microphone before setting the microphone Volume
dial to zero. the microphone and slowly increase the
microphone volume.
2. If you notice static or distortion in the microphone,
ensure that the XLR cable is connected to the
microphone securely and that the ECHO level is
3. Turn the microphone off when it is not in use.
Microphone
ON/OFF
set to a reasonable level.
Uses 2xAAA batteries (Batteries Not Included)
1. Power Standby
2. MODE: Switch source BT/USB/Memory
card/AUX/FM
3. MUTE
4. VOLUME UP*
5. NEXT
6. PLAY/PAUSE
7. EQ: Adjust sound effect
8. STOP Memory card OR USB
9. PREVIOUS
10. VOLUME DOWN
11. REPEAT – Repeat one or all
12. NUMBER KEYPAD – Select track number
* MAXIMUM VOLUME from remote will be
volume set on unit control panel’s master
volume control
REMOTE CONTROL
MICROPHONE
1
2
3
4
5
7
12
11
10
9
8
6