7
Control Elements
Sources
The Sources section provides selection options for several stereo and multichannel input
and return sources. The returns are ideally suited to select recorders, DAW, audio players,
and so on.
All Input buttons allow for switching between the input monitoring mode and the output
monitoring mode. Press once, the input button is permanently illuminated. The output
signal after the Master Fader is monitored. Press again, the Input button fl ashes. The
input signal after the input Phase Reverse switch is monitored. This way, you can easily
compare what comes in and what goes out of the console.
IMPORTANT: Selecting the return monitoring mode overrules input and output moni-
toring modes.
NOTE: All MMC 2 buttons allow for individual labeling.
Input Trims
An input selected in the Source section is routed to the Input Trims section. This section
provides On and Phase Reverse switches, a high-grade ALPS potentiometer with 41
steps and +/-10dB gain range allows for input trimming.
Stereo
Input A
Stereo
Input B
Stereo
Return A
Stereo
Return B
M-CH.
Input A
M-CH.
Input B
M-CH.
Return A
M-CH.
Return B
M-CH.
Return C
M-CH.
Return D
Sources
R
t/o
8
Input
L
t/o
7
-10
10
-1
-2
-3
-5
-4
-6
-7
-8
-9
0
1
2
3
4
5
6
7
8
9
dB
Trim
On
ø Rev
-10
10
-1
-2
-3
-5
-4
-6
-7
-8
-9
0
1
2
3
4
5
6
7
8
9
dB
Trim
On
ø Rev
