Sound Performance Lab 2269 Owner'S Manual Download Page 11

11

Warranty

SPL electronics GmbH (hereafter called SPL) products are warranted only in 
the country where purchased, through the authorized SPL distributor in that 
country, against defects in material or workmanship. The specific period of 
this limited warranty shall be that which is described to the original retail 
purchaser by the authorized SPL dealer or distributor at the time of purchase.

SPL does not, however, warrant its products against any and all defects:

1) arising out of materials or workmanship not provided or furnished by SPL, 

or 

2) resulting from abnormal use of the product or use in violation of instruc-

tions, or 

3) in products repaired or serviced by other than authorized SPL repair 

facilities, or 

4) in products with removed or defaced serial numbers, or 5) in components 

or parts or products expressly warranted by another manufacturer. 

SPL agrees, through the applicable authorized distributor, to repair or 

replace defects covered by this limited warranty with parts or products of 
original or improved design, at its option in each respect, if the defective 
product is shipped prior to the end of the warranty period to the designated 
authorized SPL warranty repair facility in the country where purchased, or 
to the SPL factory in Germany, in the original packaging or a replacement 
supplied by SPL, with all transportation costs and full insurance paid each 
way by the purchaser or owner.

All remedies and the measure of damages are limited to the above services. 

It is possible that economic loss or injury to person or property may result 
from the failure of the product; however, even if SPL has been advised of this 
possibility, this limited warranty does not cover any such consequential or 
incidental damages. Some states or countries do not allow the limitations or 
exclusion of incidental or consequential damages, so the above limitation may 
not apply to you.

Any and all warranties, express or implied, arising by law, course of dealing, 

course of performance, usage of trade, or otherwise, including but not limited 
to implied warranties of merchantability and fitness for particular, are limited 
to a period of 1 (one) year from either the date of manufacture. Some states or 
countries do not allow limitations on how long an implied warranty lasts, so 
the above limitations may not apply to you.

This limited warranty gives you specific legal rights, and you may also have 

other rights which vary from state to state, country to country. 

SPL electronics GmbH

41372 Niederkruechten, Germany

Summary of Contents for 2269













Reviews: