Sound Oasis S-560-03, Instruction Manual

Page: 7 / 16

Page 5 sleep better. feel better. live better.
Power Sources
Your Sound Oasis® unit can be powered by an AC Adapter (included) or
by 4 “AA” batteries (not included).
Using Battery Power
To install batteries, open the Battery Compartment located at the
bottom of the unit. Insert 4 “AA” alkaline batteries in the direction
marked by the indicators inside the
Battery Compartment . Replace the
Battery Compartment Door .
Using AC Power
Connect the supplied AC Adapter to the AC Adapter Jack located on
the side of the unit and plug the AC Adapter into a wall outlet. When
plugged in, the unit will draw no power from any batteries that you may
have installed in the unit’s
Battery Compartment . If a power outage
occurs, the unit will automatically switch over to battery power.
Setting the Clock & Alarm
Setting the Clock
To set the clock, slide the Time Set/Alarm Set switch on the front of the
unit to the Time Set position. Press the Hour and Minute buttons until
your desired time is shown on the Clock Display . A “ P ” in the upper left
corner indicates PM. To exit the Time Set mode, move the Time Set/
Alarm Set switch to the middle ON position.
Setting the Alarm
To set the alarm, slide the Time Set/Alarm Set switch on the front of
the unit to the Alarm Set position. An “ AL ” icon will be displayed to
show you that you are in Alarm Set mode. Press the Hour and Minute
buttons until your desired alarm time is shown on the Clock Display . To
exit the Alarm Set mode, move the Time Set/Alarm Set switch to the
middle “ On ” position.
HW_S-560-03_UserMan_ENG_02.indd 7 HW_S-560-03_UserMan_ENG_02.indd 7 9/25/08 10:31:24 AM 9/25/08 10:31:24 AM