Sound Magic Neo Dynamic – New Time for Dynamic Processing!
Controls
Threshold
: in dB, ranging from 0dB to -40dB.
Gain
: Boost in dB, ranging from -6dB to 24dB
Ratio
: Ranging from 1:1 to 12:1,
Please Note when you put it into
Maximum(12:1) position, It will auto switch to limiter mode.
Attack
: Attack Time in ms, ranging from 0ms to 100ms.
Release
: Release Time in ms, ranging from 0ms to 2000ms (2 Seconds).
Soft Knee
: When turn it on, it is soft knee. When off, it will be hard knee
AGC:
Turn on Auto Gain Control Mode.
Auto Release
: Turn on Auto Release Mode
Look Forward
: When turns it on, There will be <2ms (50 samples) delay for
main signal. Then the dynamic processors will have look forward function.
Sensor Network:
Sensors will tell you below things:
Tell you whether you threshold setting is too high to make the
compressors/limiters actually not working.
Tell you whether you compress too hard so that Over-Compression happens.
But sometimes, over-compression is good for some styles of music
Tell you the compressors/limiters
’ distortion rate. This is common determined
by attack and release values.
