10
How to place the Jukebox into transit mode.
If the Jukebox is to be moved any distance, where the mechanism is in danger
of moving, it is recommended that the Jukebox be placed into Transit Mode.
You will require the retaining foam that was delivered with your Jukebox. The
location of the following items listed is shown in FIG2 and FIG3.
• With no discs playing, press and hold the RESET button on the rear of the
Jukebox for 5 seconds. The location of this button is shown in FIG1.
The mechanism will park in the transit position and the display will show
“TRANSIT.”
• Power OFF the Jukebox using the switch on the rear of the Jukebox. The
location of the mains power switch is shown in FIG1.
• Open the door of the Jukebox and locate the 4 wingnuts secured to the
retaining bolts of the Mechanism.
• Tighten the wingnuts against the washers so that they securely hold the
mechanism down to the shelf.
• Replace the retaining foam under the playing arm by carefully holding the
playing arm and sliding the foam in from the side.
• Close and lock the front door of the Jukebox.
The Jukebox can now be safely moved.
