VenueHub : Sound Leisure
The following diagrams show different speaker configurations:
!
Each channel on the speaker matching pad should be connected independently. Under
no circumstances should a single ground line be used to connect all the speakers back
to the pad, doing so will cause the amplifier to enter a fault condition.
Auxiliary Inputs
The amplifier can be used to play audio from auxiliary sources when the Jukebox is idle.
To interface correctly with the amplifier the sources should output at least a line level
(1Vpp) stereo signal.
The amplifier has 2 stereo auxiliary inputs which are prioritised, this allows automatic
switching between sources without the need for an external switch box.
Auxiliary 1 has priority over auxiliary 2
If sources are connected to both inputs only auxiliary 1 will be heard
If the source connected to auxiliary 1 is turned off the amplifier will switch to auxiliary 2
If the source connected to auxiliary 1 is turned on again the amplifier will switch back to
auxiliary 1
Using the menu system a switch over time between 2 and 60 seconds can be set for the
auxiliary inputs. This is the time that an auxiliary signal must be present before the
amplifier will switch to it.
The display will show a count down when the amplifier is preparing to switch inputs.
Microphone Input
!
3
