XL-SATA User Guide and Installation Instructions
2
Installing the XL-SATA
1. Place recorder upside down on a steady fl at, non slip surface.
2. With a #1 Phillips head screwdriver remove the screws in the following order. The fi ve long black oxide screws will no
longer be needed. The two smaller screws (#4 and 5) will be needed for reassembly.
Attention: Remove screws in this order to avoid stripping.
44
33
11
22
66
55
77
3. Gently remove the bottom panel. As you remove the bottom panel be careful of the internal AA battery wires as they will
remain connected to the internal circuitry and the bottom panel.
4. Loosen the screw of the small green circuit board holding down the hard drive ribbon cable.