background image

MP-2 Microphone Preamplifier

 

User Guide and Technical Information

 

 

Page 8

 

 

©1999-2000 Sound Devices, LLC  

FCC Statement 

This device has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules.  These 
limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.

 

 

CE Conformity Statement 

Declaration of Conformity 

According to ISO/IEC Guide 22 

Manufacturer’s Name:

 Sound 

Devices, 

LLC 

Manufacturer’s Address:

 Sound 

Devices, 

LLC 

 300 

Wengel 

Drive 

 

Reedsburg, WI 53959 USA 

declares that the product:

 

MP-2 Professional Microphone Preamplifier 

is in conformity with: 

 Document 

No. 

Description 

 

EN55103-1 (1997) 

Emissions standard for product family audio devices for professional use 

 
 

EN55103-2 (1997) 

Immunity standard for product family audio devices for professional use 

 
 

EN55022 (1995)/ 

Radiated and Conducted emissions, Class B 

 CISPR 

22 

(1997) 

 
 

EN61000-4-2 (1995)/ 

ESD – 6kV contact, 8kV air-discharge 

 IEC1000-4-2 

(1995) 

 
 

EN61000-4-3 (1995)/ 

Radiated RF Immunity, 10 V/m, 80% 1 kHz amplitude 

 IEC1000-4-3 

(1995) 

modulation 

 
 

EN61000-4-4 (1995)/ 

EFT/Burst, I/O lines, +/- .25 kV to +/- 1.0 kV 

 IEC1000-4-4 

(1995) 

 
 

EN61000-4-6 (1996)/ 

Conducted RF Immunity, 10 V, 80% 1 kHz amplitude modulation 

 IEC1000-4-6 

(1996) 

Tested by:

 

L. S. Compliance, Inc.  Cedarburg, Wisconsin 

 
December 16, 1999 

 

Matthew Anderson 
Director of Engineering 

Warranty 

Sound Devices, LLC warrants the MP-2 Microphone Preamplier against defects in materials and workmanship for a period of ONE (1) year 
from date of original retail purchase. This is a non-transferable warranty that extends only to the original purchaser.  Sound Devices, LLC 
will repair or replace the product at its discretion at no charge. Warranty claims due to severe service conditions will be addressed on an 
individual basis. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. SOUND DEVICES, LLC DISCLAIMS ALL OTHER 
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
SOUND DEVICES, LLC IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH 
OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY. Because some jurisdictions do not permit the exclusion or limitations set forth 
above, they may not apply in all cases. 
 

For all service, including warranty repair, please send the MP-2, along with proof of purchase date to: 
 
Sound Devices, LLC 
Service Repair 
300 Wengel Drive 
Reedsburg, WI 53959 USA

 

Summary of Contents for MP-2









Reviews: