background image

MixPre-D User Guide and Technical Information

14

v1 .0 Features and specifications are subject to change . Visit www .sounddevices .com for the latest documentation .

Warranty and Technical Support

Warranty & Service 

Sound Devices, LLC warrants the MixPre-D against defects in materials and workmanship for a 

period of ONE (1) year from date of original retail purchase. This is a non-transferable warranty that 

extends only to the original purchaser. Sound Devices, LLC will repair or replace the product at its 

discretion at no charge. Warranty claims due to severe service conditions will be addressed on an in-

dividual basis. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. SOUND 

DEVICES, LLC DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOUND 

DEVICES, LLC IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL 

DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL 

THEORY. Because some jurisdictions do not permit the exclusion or limitations set forth above, they 

may not apply in all cases. 

For all service, including warranty repair, please contact Sound Devices for an RMA (return mer-

chandise authorization) before sending your unit in for repair. Product returned without an RMA 

number may experience delays in repair. When sending a unit for repair, 

please do not include accesso-

ries, including carry cases, cables, or adapters unless instructed by Sound Devices

Sound Devices, LLC  

Service Repair RMA #XXXXX  

300 Wengel Drive  

Reedsburg, WI 53959 USA  

telephone: (608) 524-0625 

Technical Support / Bug Reports 

For technical support and bug reporting on all Sound Devices products contact: 

Sound Devices, LLC  

E-mail:  [email protected]  

web: www.sounddevices.com/support 

Telephone:  +1 (608) 524-0625 / Toll-Free in the U.S.A.:  (800) 505-0625  

Fax:  +1 (608) 524-0655

Summary of Contents for MixPre-D



















Reviews: