manualshive.com logo in svg

Sound Devices Kashmir MIXPRE-3 II, User Manual

Share
Download
Sound Devices Kashmir MIXPRE-3 II User Manual Download Page 9

9

Topics in this section include:

Touch-Screen User Interface

Icons

The touch screen is the primary source 

of information when operating the 

MixPre-3. All settings are configured and 

menus easily navigated via the touch 

screen. All signal level meters may be 

viewed on screen. 
This chapter describes meter views, 

including the HOME screen which is 

displayed when no other screens are 

active, the main MENU screens, and 

navigation icons. 
Other icons and screens, such as the 

Channel Settings screen, are described 

where applicable throughout the guide.

The MixPre-3 uses a variety of icons to ease navigation. This quick reference 

table shows the icons and what they mean. 

i

con

D

escription

Menu icon. Tap this icon to access the main MENU screen.

Home icon. Tap this icon to navigate to the HOME screen (meter view).

Back icon. Tap this icon to return to previous screen.

Pages icon. Tap this icon to toggle through pages. For instance, menus 

with multiple settings may require a multi-page display. The solid black dot 

represents the page shown. One or two other hollow dots may appear to 

represent the additional pages that are available. 
Headphone icon. Tap this icon to settings associated with headphones. 

Folder icon. Tap this icon to view the Take List of recorded tracks.

 

Icons

 

Meter Views

 

Using Meter Views

 

Returning HOME to main Meter View

 

Metering Ballistics and Peak Hold

 

Accessing the MENU Screen 

 

Customizing the LCD and LEDs

DRAFT 

Not For Publication

Summary of Contents for Kashmir MIXPRE-3 II





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands