manualshive.com logo in svg

Sound Devices 664, User Manual

Share
Download
Sound Devices 664 User Manual Download Page 69

69

Topics in this section include:

Timecode and Sync

Timecode

The 664 features a fully-integrated 

Ambient™ timecode generator and 

reader that supports all common rates 

and modes. The 664 holds accurate 

timecode for up to two hours after 

shutdown, using an internal, Lithium-

Ion timecode battery. This timecode 

battery is charged whenever the 664 

is powered on or by plugging the 664’s 

USB connector into a USB power source.

 

i

After two hours without power, the 664 

reverts to a slightly less-precise time-

of-day crystal to maintain the date and 

time on the device.

Word Clock connectors on the back 

panel allow the 664 to be sample 

synchronized with other digital audio 

equipment in the work flow.

File-based recorders place a timecode and frame rate stamp in the BEXT and 

iXML chunks of an AES31 broadcast WAV file. During playback, the mixer 

generates SMPTE timecode from this number and extrapolates it based on the 

timecode frame rate. All files generated by the mixer have timecode numbers 

that begin on the 0 frame (or 02 in DF modes) and end on the 0 frame such 

that a file’s duration is always an integer number of seconds long. If necessary, 

pre-roll and post-roll is dynamically applied to accomplish this, simplifying 

synchronization in post-production. The timecode value and frame rate of the 

664 are displayed on the Main screen.

Timecode

Frame rate or sample rate

 

i

If sample rate is displayed–as shown–instead of the frame rate, toggle the view to 

frame rate by holding METERS down and slide the A B/C switch to the left. 

 

Timecode

 

Setting the Timecode Mode

 

Setting the Frame Rate

 

Setting Timecode Hold Off

 

Jamming the Timecode

 

Setting the Timecode Generator

 

Setting User Bits

 

Setting Display Mode

 

Synchronizing the Word Clock

 

Setting Word Clock Sensitivity

Summary of Contents for 664
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands