manualshive.com logo in svg

Sound Devices 664, User Manual

Share
Download
Sound Devices 664 User Manual Download Page 113

113

Topics in this section include:

Shortcuts

The 664 features numerous shortcuts to 

help speed navigation. 

The shortcuts require either 

simultaneously pressing combinations of 

front panel controls or using keystroke 

combinations when a USB keyboard is 

attached to the mixer.

F

unction

s

equence

a

ction

Arm/Disarm Track

SELECT: Press and hold METERS then 

press the Select encoder. 
This toggles the armed status of the highlighted 

track on the Main screen.

File/Take List

MENU + HP: Press and hold MENU then press the 

Headphone encoder.
This displays the Take List screen. 
Sliding the MIC/TONE switch left then toggles 

between the Files and Takes.

False Take

HP + << (Rewind): Press and hold the Headphone 

encoder then push the Transport control to the 

left.
This moves the previous recorded file(s) to the 

False Takes folder and decrements the Take 

number.

Scene Increment

HP + >> (Fast Forward): Press and hold the 

Headphone encoder then push the Transport 

control to the right.
This increments the scene name according to the 

Scene Increment Mode setting. 

 

Front Panel Shortcuts

 

USB Keyboard Shortcuts

Front Panel Shortcuts

Summary of Contents for 664
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands