Sound Devices 442 User Manual And Technical Information Download Page 30 | Manualshive

Page: 30 / 34

Sound Devices 442 User Manual And Technical Information Download Page 30

442/442N User Guide and Technical Information

28

v. 5.07

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Accessories

Several high-value accessories are available for the 442 mixer, including a carry-case, cables, and
power accessories. For a full list of Sound Devices products and accessories, visit our web site

www.

sounddevices.com/products

.

CS-4

Production case with high-quality strap for use with 442 Field
Mixer with integrated acessory compartment and NP-type battery
compartment. Built for Sound Devices by CamRade..

CS-W

The CS-W is a removable accessory case for the CS-4 Production Case.
The CS-W is designed to hold wireless transmitters and receivers and
provides the appropriate cable routing for interconnection of wireless,
mixers, and recorders. Built for Sound Devices by CamRade.

XL-H

Bare Hirose connector, (Hirose p/n HR10-7P-4P) to mate with locking
4-pin DC power jack.

XL-K1

Knob accessory kit for 442. Replaces the fader knobs with visual and
tactile position-indicating knobs. Kit of four, 2-black 2-gray. Includes
colored inserts. 442-specifi c.

XL-NPH

NP-type battery cup with 24-inch cable with Hirose 4-pin locking
power jack at equipment end.

XL-WPH3

AC to DC Power Supply (in-line) 100 - 240V 50/60 Hz input, 12 VDC
3.75 A (45 W) output, Hirose 4-pin DC plug. Supplied with 3-pin IEC
cord for use in North America and Japan.

XL-1B

TA3-F to TA3-F cable, 302 and 442 mixer linking, also used to connect
442 direct outputs to 7-Series inputs; 12-inch.

XL-2

TA3-F to XLR-M (male) cable; 25-inch; connects balanced TA3 to XLR
inputs; package of two cables

XL-2F

TA3-F to XLR-F (female) cable; 25-inch; connects balanced TA3 to XLR
inputs; package of two cables.

XL-3

3.5 mm to TA3-F link cable for MixPre/MP-2 Tape Output to 302 Mix
In; 20-inch.

XL-4

Bag of four (4) TA3-F-type connectors.

XL-10

Hirose 10-pin to two-XLR (balanced L/R) and 3.5 mm plug (442 Stereo
Return A) breakout cable, 24-inch; includes in-line 20-foot extension
cable; 442-specifi c.

«
...
28
29
30
31
32
...
»

Summary of Contents for 442



































Reviews:

No comments