C
AT
5
R
EMOTE
C
AM
1-S
O
VERVIEW
&
I
NSTALLATION
G
UIDELINES
www.soundcontrol.net
Page 3 of 8
28 Knight Street, Norwalk, CT., 06851
Phone (203) 854-5701 Fax (203) 854-5702
© SOUND CONTROL TECHNOLOGIES, INC., 2006
RC1S_04d.D
OC
-9/1/2006
SOUND
CONTROL
TECHNOLOGIES
Sony BRC-300™
3
SCT part number:
RC1-SB™
Included in this package are:
1.
Mounting Bracket: This bracket mounts to a standard 3-gang wall box for clean, convenient mounting of the
camera. Typical electrical boxes would be:
a.
new construction 3-gang switch box
b.
old work (retrofit) boxes.
2.
Mounting Screw: A thumb screw is provided for attaching the camera to the mounting bracket shelf.
3.
Interface Modules: This pair of interfaces provides S-Video, power and control (RX, TX, GND & IR) for the
camera. One small electronics enclosure is required at the rack or head end and a
second module is mounted to the back of the camera mounting plate, housed in the 3-
gang box.
4.
Power Supply:
The included 30VDC power supply is designed to operate a camera up to 100’ from the
head-end while providing clean, regulated power for safe operation of the camera. 30
Volts from the head end power supply is regulated to 12 VDC at the camera for clean,
reliable operation.
5.
Molded Cables:
Two molded cables are included in this kit.
a.
Sx001 Camera cable is a molded 8-Pin mini DIN plug (White) for the camera
mount electronics that breaks out to a molded S-Video plug (Yellow), 2-Pin
power plug (Black, regulated 12V DC) and 8-Pin mini DIN for control (Black).
b.
Sx003 Head end cable is a molded 8-Pin mini DIN plug (Blue) for the head
end electronics that breaks out to a molded S-Video jack (Yellow) and a
molded BD9 (Black) for remote control.
Simple RC1-SB™ System Diagram
3
Sony BRC-300 currently supports S-Video, power & control up to 100 feet on a single Cat5