background image

Sound Choice Pro Audio 

www.scpaudio.com 

T801M Pre-amplifier    page 3

•  Be sure to read through all the instructions in this Manual before using the product.

•   Please ensure that you observe the instructions in this Manual, especially those highlighted by Safety Symbols and Safety 

Messages. 

•   Please retain this Manual in a safe place for future reference.

Safety Symbol and Safety Message Conventions

The Safety Symbols and Safety Messages described below have been included in this Manual to prevent possible bodily injury 

and property damage which could result from mishandling.  Please read through this Manual and become familiar with all 

Safety Symbols and Safety Messages , before operating this product.

When Installing the Unit

• Do not expose the unit to rain or an environment where 

it may be splashed by water or other liquids, as doing so 

may result in fire or electric shock.

• Use the unit only with the voltage specified on the unit. 

Using a voltage higher than that which is specified may 

result in fire or electric shock.

• Do not cut, kink, or otherwise damage, nor modify the 

power supply cord. In addition, avoid using the power 

cord in close proximity to heaters, and never place heavy 

objects -- including the unit itself -- on the power cord, as 

doing so may result in fire or electric shock.

• Be sure to replace the unit’s terminal cover after 

connection completion. Because high voltage is applied 

to the speaker terminals, never touch these terminals to 

avoid electric shock.

• Be sure to ground to the safety ground (earth) terminal 

to avoid electric shock. Never ground to a gas pipe as a 

catastrophic disaster may result.

• Avoid installing or mounting the unit in unstable 

locations, such as on a rickety table or a slanted surface. 

Doing so may result in the unit falling down, causing 

personal injury and/or property damage.

When the Unit is in Use

• Should any of the following irregularities be found 

during use, immediately switch off the power, disconnect 

the power supply plug from the AC outlet and contact 

your nearest Sound Choice dealer. Make no further 

attempt to operate the unit in this condition as this may 

cause fire or electric shock.

  - If you detect smoke or a strange smell coming from 

the unit.

  - If water or any metallic object gets into the unit

  - If the unit falls, or the unit case breaks

  - If the power supply cord is damaged (exposure of the 

core, disconnection, etc.)

  - If it is malfunctioning (no tone sounds.)

• To prevent a fire or electric shock, never open 

nor remove the unit case as there are high voltage 

components inside the unit. Refer all servicing to your 

nearest Sound Choice dealer.

• Do not place cups, bowls, or other containers of liquid 

or metallic objects on top of the unit. If they accidentally 

spill into the unit, this may cause a fire or electric shock.

• Do not insert nor drop metallic objects or flammable 

materials in the ventilation slots of the unit’s cover, as this 

may result in fire or electric shock.

1.  SAFETY INSTRUCTIONS

WARNING

WARNING

CAUTION

Indicates a potentially hazardous situation which, if mishandled, could result in death 

or serious personal injury.

Indicates a potentially hazardous situation which, if mishandled, could result in 

moderate or minor personal injury, and/or property damage.

Summary of Contents for 801M

















Reviews: