Welcome
Congratulation and thank you for the purchasing CA2 series 2 channel constant voltage
power amplifier.
Unpacking and Installation
Introduction
2
Introduction/Features
- Front : Power on/off switch.
Features
•
Controls
- Rear : 2 output level controls.
2 HPF(180 Hz) on/off switches.
•
Connectors
- 2 CH blanced input with euro block.
- 2 CH constant voltage output with euro block .
- Power and SIG,-10dB, CLIP protect for each output channel.
•
Indicators:
- Energy efficient class-D amplifier with auto standby mode (option)
Although it is neither complicated to install nor difficult to operate, a few minutes of your time
is required to read this manual for a properly wired installation and to become familiar with
its many features and how to use them. Please take a great care in unpacking your amplifier
and do not discard the carton and other packing materials. They may be needed when
moving or required if it becomes necessary to return for service. Never place the unit near
radiators, in front of heating vents, excessive humid or dusty locations to avoid damage, to
get years of quality use.
Connect your unit with the system components according to the description on the following
pages.
Summary of Contents for CA2120
Page 2: ......
