- 2 -
IMPORTANT SAFETY INFORMATION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DO NOT EXPOSE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's enclosure. It may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the product
.
Warnings
•
Connect this unit’s power cord only to an AC outlet of the type stated in this Owner’s Manual or as
marked on the unit. Failure to do so is a fire and electrical shock hazard.
•
Do not allow water to enter this unit or allow the unit to become wet. Fire or electrical shock may
result.
•
Do not place a container with liquid or small metal objects on top of this unit. Liquid or metal objects
inside this unit are a fire and electrical shock hazard.
•
Do not remove the unit’s cover. You could receive an electrical shock. If you think internal inspection,
maintenance, or repair is necessary, contact your dealer.
•
Do not modify the unit. Doing so is a fire and electrical shock hazard.
•
If the power cord is damaged (i.e., cut or a bare wire is exposed), ask your dealer for a replacement.
Using the unit with a damaged power cord is a fire and electrical shock hazard.
•
If you notice any abnormality, such as smoke, odor, or noise, or if a foreign object or liquid gets inside
the unit, turn it off immediately. Remove the power cord from the AC outlet. Consult your dealer for
repair. Using the unit in this condition is a fire and electrical shock hazard.
Cautions
•
Keep this unit away from the following locations:
Locations exposed to oil splashes or steam.
Unstable surfaces, such as a wobbly table or slope.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce large quantities of heat.
Locations subject to excessive humidity or dust accumulation.
•
Hold the power cord plug when disconnecting it from an AC outlet. Never pull the cord. A damaged
power cord is a potential fire and electrical shock hazard.
•
Do not touch the power plug with wet hands. Doing so is a potential electrical shock hazard.
•
To relocate the unit, turn the power switch off, remove the power plug from the AC outlet, and remove
all connecting cables. Damaged cables may cause fire or electrical shock.