To turn on the zone on either press the source button or the off button on the remote or keypad.
If you press the OFF button the zone will go back to the source selected when it was last shut off.
In either case the zone goes to a preselected mid-low volume, not necessarily the volume selected
when it was last shut off.
To adjust the volume press the volume switch up or down as desired. The relative volume is
shown in the led displays on the top.
To temporarily mute the output, press the mute button on either the remote or keypad. It mutes
the output in this room.
Equalization
Equalization cannot be performed from the remote control. To enter the equalization mode press
the FNC button. The four source button will have their led’s running in a circular motion. To raise
the bass output in this room only push and hold the source 1 button until the desired effect is
achieved.
When the maximum bass is selected the OFF button will blink. Do the same with bass down,
treble up and treble down. The parameters selected go into memory and are retained even if the
power to the system is turned off.
Press the FNC button again to exit the equalization mode.
To go back to a flat frequency response, enter the equalization mode again and when in this mode
with the source leds going in a clockwise direction press the MUTE button. The equalization is now
flat. Again to exit this mode press the FNC mode and
Sound Acoustics Service information
The SA-44 amplifier does not contain any user serviceable parts inside. If you suspect a problem
that may require servicing, contact us at www.MySoundAcoustics.com. It is extremely important
that only an authorized service dealer make any repairs. This will ensure proper service and
preserve the protection of your warranty. Keep your receipt in a safe place so that it will be
available to verify the purchase date, should you experience a problem covered by Sound
Acoustics System’s warranty.
Troubleshooting
Your Sound Acoustics amplifier is designed for trouble-free operation. If you follow the instructions
in this manual, you should enjoy many years of high-quality listening enjoyment. However, as
with any sophisticated device, there may be occasional problems upon initial installation, or during
the life of the amp. The items on the list below are a brief guide to the minor problems that you
may be able to correct yourself. If these solutions do not help, or if the problem persists, contact
us for assistance at 1-604-707-0116 in Canada and the USA. We are in the Pacific time zone.
