- 2 -
How to install tX-USBhubIN with sCLK-12.0
2.3
Power to sCLK-12.0 by the external power
For using the external power to sCLK-12.0, the tX-USBhubIN should be connected to the external power.
And also the internal power connection is recommended to be made for the safety use.
2.3.1
Separate the switch board of tX-USBhubIN by unscrewing 2 Philippe screws.
2.3.2
Connect the supplied power cable for sCLK-12.0 from the J305 connector on sCLK-12.0 to the J403 on tX-
USBhubIN.
2.3.3
Assembly the switch board back by screwing 2 Philippe screws.
2.3.4
Connect the regulated 9V/2A external power to tX-USBhubIN.
<tX-USBhubIN>
<sCLK-12.0>
3
Connect tX-USBhunIN and sCLK-12.0 by the RF cable
3.1
To transfer the clock signal, connect J301 RF connector on tX-USBhubIN to J304 RF connector on sCLK-12.0 by
the supplied RF cable.
<tX-USBhubIN>
<sCLK-12.0>
4
Close the PC case and connect one of tX-USBhubIN USB ports to a USB device and the combo will operate
automatically without installing the driver once PC is powered on.
J304
J301
J305
RF cable for Clock signal
J305
J
3
0
5
J403
Power cable for sCLK-12.0
Locate under the switch board
External Power Input
