Sota WOZ4 Manual Download Page 4

© 2003-2021 SOTA Instruments Inc. 

Page 4 of 7

|

 www.sota.com

The Water O

3

zonator Model WOZ4 Manual

b. It is important to place the water with submerged airstone in a well-ventilated 

area, as concentrated ozone in air may irritate lung tissue. For example, under a 

stove-top fan. Place the container of ozonating water well away from the ozone 

unit.
Note: Ozonating liquids other than water may clog the airstone and will void the 

warranty on the airstone.

4. Move the toggle switch to the ON position. The GREEN light will come on.
5. 

Check to be sure fine bubbles pass out of the Airstone into the water. If you do not 

see any bubbles, ensure the silicone tubing is firmly attached to the air outlet on the 

side of the unit. As the unit operates, you should catch the smell of ozone. 

6. For an 8 ounce or 250 ml cup of water, ozonate for 

about 2 minutes.

Note: Refer to Timing to Saturate with Ozone below 

for other volumes of water.

7. To turn OFF, move the toggle switch to the OFF 

position. 

Allow water to drain from the tubing after use. 

This ensures water will not drain back into the 

unit. 

8. Use the freshly ozonated water 

immediately

 for 

optimal results. If left for 20 minutes in open air, the 

ozone dissipates out of the water. The benefits of the 

extra oxygen will no longer be present.

9. Turn the unit off and 

unplug the wall adaptor 

when not in use.

Notes: 

Temperature of Water: 

Chilled water holds more ozone, however room temperature 

water is healthier for the stomach.

Storage

: Larger quantities of ozonated water can be stored in a glass container 

with an air-tight lid. The amount of ozone in the water will continue to dissipate, 

eventually leaving no ozone in the water.

Pump:

 If built-in air pump stops running, turn unit off and contact your closest 

repair depot.  See page 7.

Summary of Contents for WOZ4








Reviews: