FOCUS CONTROL AND CAPTURE
Copyright © 2013 SOTA Imaging, Inc.
4
focus
focus
Image is captured
upon RELEASE
of button.
Mount camera cradle by securing the
flat back side to wall or surface. Make
sure the diagonal sloped side is facing
upwards as shown.
Mount flat back side
to surface with screws
or double-sided tape
Diagonal sloped side should face up
1
2
Place camera bottom (the side where
the USB connector sits) through the
cradle top-opening.
The face of the camera with the
capture button, focus, and Claris
logo should be facing OUT towards
you. There is a magnetized component
within the cradle which will shut the
camera OFF.
1.
2.
Half-way Down:
1 to 2 molar shot
All-the-way Down:
1/2 molar shot
All-the-way Up
(Auto-focus):
full face, full smile,
full arch, arch quadrant
1
2
TURNING CAMERA OFF
MAINTENANCE
Clean lens/prism (small black square in center of LED lights) with alcohol
and Q-tip at least once a week but preferrably everyday before use. This
will ensure a clear image.
DO NOT have patient bite down on camera head. Biting down may cause
the lens or surrounding glass to chip or break.
