10
HOW DO YOU TEST YOUR PFD USING THE MANUAL INFLATOR?
1. To test your inflatable PFD, you will need:
•
Your
fully armed PFD
, and
• Rearming kit
approved for your PFD.
2. Put on the PFD.
3. Actuate the inflation system by jerking firmly downward on the Jerk to
Inflate tab. The PFD should fully inflate within 5 seconds.
4. Get into shallow water, just deep enough that you can stand with your
head above the surface.
5. See if the PFD will float you on your back or just slightly back of vertical.
In a relaxed floating position, verify that your mouth is well above the
water’s surface. Note the effect of where you hold your legs on how
you float.
6. Get out of the water and remove the PFD. Remove the used CO
2
cylinder from the PFD inflator. Completely deflate the PFD using the
oral inflator.
7. Let the PFD dry thoroughly.
REARM
and
REPACK
the PFD in
accordance with the manufacturer’s instructions!
Summary of Contents for 33MSPT
Page 2: ...2...
