10
Fig.3.5b
3.5. ADJUSTING THE LATERAL PADS (Width & Height)
If
•
the harness goes through the back panels and
packers, then release the upper cam locks on
the harness (See 3.6) and pull the upper straps
(Fig.3.5a) through the seat shell and all the back
panels.
Remove
•
the complete back panel assembly
including all pads (Fig.3.5b).
Release
•
the straps (Fig.3.5c) from the rear of the
pads.
Reposition
•
the lateral pads (Fig.3.5d) and secure
the strap around the back of the pads.
Refit
•
the back panel assembly and secure the
chest strap (Fig.3.5e).
Refit
•
harness straps (See 3.6).
Fig.3.5c
Fig.3.5d
Fig.3.5e
Fig.3.5a