S5 System • System description
SM-5811-0000.01 ENG
3.3
Item name
Operation
1
Stöckert S5 System
2
S5 console
Contains the electronic / power supply pack as well as the
fan and accumulators for the emergency power supply
3
S5 console table
Supports 4 pump housings or units (depending on the type
of console)
4
Main switch
Switches the entire S5 System on and off
5
S5 mast retaining flange (left / right)
Side components for supporting the sliding T-bar handles
and telescopic masts
6
Push bar
➜
Mounting for the System Panel (
)
➜
Mounting for additional equipment
➜
Mounting for disposable items
7
Telescope mast with
8
infusion rack
9
Telescope mast, movable with
infusion rack
10
Horizontal mast
Stabilising the mast system
11
Crossbar for movable mast
Permanently mounted on the back of the console for
supporting the movable telescope mast
12
Console casters with
13
Parking brakes
Transporting the S5 System
14
S5 system panel
The modular control unit mounted on the mast comprises
4 module slots to take a maximum of 4 display and control
modules with touch screens.
Blank modules are plugged into slots which are not being
used.
For details, see Chapter 3.2.3 on page 3.8
15
S5 electronics and power pack
(abbreviation: E/P pack)
Cover closed
The electronics / and power pack is located inside the
console. The E/P pack comprises the power-supply
components (including the emergency power supply), the
system connection panel and the necessary sensor
modules.
For details, see Chapter 3.2.4 on page 3.10
16
S5 roller pump 150
(abbreviation: S5 RP 150)
For details, see Chapter 3.2.5 on page 3.12
17
S5 double roller pump 85
(abbreviation: S5 DRP 85)
For details, see Chapter 3.2.5 on page 3.12