SORG MIO MOVE, User Manual

Page: 13 / 36

User Manual
13
3 Handling
3.1 WHEELS
3.1.1 Quick release axle wheels
All of our rear and 12” wheels are equipped with
quick release axles for fast removal.
(1) To release or apply the quick release axle, push
the lock button (A) in the middle of the wheel nub and
release it after the action.
(2) After applying, the lock ball (A) must be completely
in sight at the end of the quick release axle. The
wheels should not be able to be removed.
Be sure to regard the following points:
• Wheels are turning parts and can cause
injuries to fingers.
• After fastening the wheels, check the secure
hold of the quick release axle.
• (2) Check the small lock ball (tension spring)
(A) at the end of the quick release axle to be
sure it functions properly.
• Check the air pressure of the rear wheels
regularly, in order to ensure the functionality
of the brakes!
With camber of wheels the toe in can be corrected if
needed (see service record under “ track alignment ”).
ATTENTION
It is absolutely necessary that you let your rehab
technician do the required work.
3.1.2 Drum brake wheels
To apply or remove please proceed as described with
the rear wheels.
ATTENTION
The drum brake wheels’ brake pads are extremely
sensitive and can lose their functionality from
dirt or scratches on the brake pads. Remove lint
and dirt from the brake pads regularly with a soft
brush. Check the functionality of the Bowden cables
regularly, in short intervals.
(3) To slow the ride down, the carer pushes both brake
levers simultaneously (A) .
(4) To secure the wheelchair, pull both levers (A) up
and latch the small lock levers (B) in the grooves (C) .
The drum brakes are now blocked.
To unlock the blockage, pull both brake levers (A) a
little bit higher to unlock the small lock levers (B) .
(1)
(A)
(A)
(2)
(4)
(A)
(C) (B)
(3)
(A)