475# Torino Crib assembly instructions ( JW )
SORELLE
6
Model shown is example only.
Style may vary.
FINALLY CHECK
• PRIOR TO USING THE CRIB, ENSURE ALL BOLTS ARE TIGHTENED. DO NOT OVER TIGHTEN.
• ENSURE THAT THE MATTRESS IS THE RECOMMENDED SIZE.
• ENSURE THE MATTRESS BASE IS LOCATED AT THE CORRECT LEVEL TO SUIT THE CHILD.
• CRIB IS NOW READY FOR USE.
TODDLER BED and FULL SIZE BED ASSEMBLY ( Option Purchase )
Contact the store where you purchased the crib or
visit
www.sorellefurniture.com
to locate a dealer near you.
Disassembling Crib for Storage
To disassemble crib for storage, follow assembly steps in reverse.
Store all parts and hardware together in a safe place. Store the instruction manual in the supplied
envelope attached to mattress support base for future reference for reassembly.
To clean, use only mild household soap and warm water.
DO NOT
use bleach or detergent.
DO
NOT
use abrasive cleaners which can scratch the finish. Use clean soft cloths to wash, rinse and
dry. With proper care, the quality finish will last a long time. Wood surfaces may be treated with
a light application of a good grade of non-toxic furniture polish. Read contents on back of polish
to make sure polish will not harm unit.
Store all parts from Crib, which are not used for Full Size Headboard, in original carton(s) (if
available) to prevent damage and allow reuse.
Cleaning and Storage
Note: The Toddler rail (#136) and Adult rail (#215) are sold separately to convert
the crib to a Toddler bed and a full size bed for your choose.
