Changes to the Unit
l
Changes, additions to or conversion of the unit are not permitted without written permission from the manufacturer.
l
It is likewise forbidden to install additional components that have not been tested together with the unit.
l
If it becomes clear that safe operation of the unit is no longer possible, for example because of damage to the hous-
ing, turn the Unit off immediately.
l
Any parts of the unit or accessories that are not in perfect condition must be exchanged immediately.
l
Use only original spare parts and accessories from the manufacturer.
l
Markings made on the unit at the factory must not be altered, removed or made illegible.
l
Only the settings described in these instructions may be set using the Unit.
Changes to the unit can compromise the safety and function of the unit or the entire system.
Warranty and Liability
The unit has been manufactured and tested with regard to high quality and safety requirements. The unit is subject to the statutory
guarantee period of two years from the date of sale. The warranty and liability shall not include, however, any injury to persons or
material damage that is attributable to one or more of the following causes:
l
Failure to observe these installation and operating instructions.
l
Improper installation, commissioning, maintenance and operation.
l
Improperly executed repairs.
l
Unauthorised structural changes to the unit.
l
Use of the device for other than its intended purpose.
l
Operation above or below the limit values listed in the ‚Specifi cations‘ section.
l
Force majeure.
Disposal and Pollutants
The unit conforms to the European RoHS 2011/65/EU for 2011/65/EUthe restriction of the use of certain hazardous substances in
electrical and electronic equipment.
Under no circumstances may the device be disposed of with the normal household waste. Dispose of the unit only at appro-
priate collection points or ship it back to the seller or manufacturer.
Description °CALEONbox
Description
The °CALEONbox is a universal heating and individual room controller for surface heating systems. In combination with up to 8
°CALEON Room Controllers, this enables efficient use and function control of your surface heating with intuitive operation. The inputs
and outputs can be freely assigned via °CALEON, so that different heating systems can be implemented.
Important characteristics of the °CALEONbox:
l
Control of 8 heating zones with 1 - 4 thermostatic radiator valves each
l
Measurement of room temperature and humidity in combination with °CALEON room controllers
or 1-Wire sensors
l
optionally weather compensated via an external temperature sensor
l
optional control of heating circuit pump and mixer (PWM oder 0-10V) possible
l
2 separate CAN bus interfaces for building network and private floor or apartment network
l
connectable with other SOREL products via CAN bus
l
Control of mixers, valves and energy generators via 0-10V / PWM
l
2 additional floating changeover contacts (terminals J and K) for flexible assignment
l
optionally usable with standard room thermostats
l
easy to install due to innovative strain relief and coloured terminal strip
l
optional up to 20 1-Wire temperature sensors connectable
4
