310 Quadral Drive | Wadsworth, OH 44281 | soprema.us |
800.356.3521
3
STEP 7:
Attach the Mounting Accessory.
Press the
Accessory
from Step 6 firmly into the top of the
Pedestal
. All Mounting Accessories are mounted in the
same manner as shown here.
Note: Top Accessories will attach to Slope Corrector (if
using Top Slope Corrector). When using Bottom Slope
Corrector, Top Accessories will attach directly to the
Pedestal Top.
STEP 8:
If using shims, install Pedestal Shim.
Some installers may elect to utilize a
Pedestal Shim
to the
top of the
Pedestal Assembly
in order to reduce slippage or
vibration of the paver. Others only use
Pedestal Shims
to
adjust for the variances in paver thickness that cause a
“rocking effect” after the paver has been placed. The
decision regarding this
Accessory
should be made by the
Design/Install team.
STEP 9:
Adjust the Pedestal Height.
First, loosen the
Locking Ring
to allow
Pedestal
adjustment.
Note: to loosen ring, turn counter-clockwise
Next, rotate the top to adjust pedestal to approximate height
needed.
Note: To increase height, turn top counterclockwise. To
lower pedestal, turn top clockwise.
Place the
Pedestal
underneath the paver and adjust to
approximate finished height.
If not using
Slope Corrector
, skip to Step 11.
