3
3. Power Up the Device
Connect the power cable and turn on the device
Connect the device to the power supply using the power cable(s). Turn the device
on. The power switch is on the back of the device and is placed next to the power
connection. Once the device has booted completely, you’ll hear an acoustic signal:
five beeps in a row.
4. Connect your Administration PC
Administration PC connection properties:
Use the settings below to configure your (PC/Laptop) network interface:
Ì
IP address: 10.0.1.2
Ì
Netmask: Enter 255.255.255.0
Ì
Default Gateway: Enter the IP address of the device’s
internal network card (MGMT1): 10.0.1.1
Ì
DNS Server: Enable this option and enter the IP address
of the internal network card (MGMT1): 10.0.1.1
Connect your PC/Laptop to MGMT1 port of the device:
Start the browser and enter the management IP address of the device’s LAN port that
your PC is connected to:
https://10.0.1.1:4444
Login with the default details below:
Username:
admin
Password:
admin
Quick Start Guide
XG 550/650/750 Rev. 2
