3
2. Mount & connect the device
Mount the antennas (for wireless models only)
Connect the provided antennas to the connectors on the back
of your appliance and align them in a vertical position.
Connect the ports to the internal and external networks
1. Connect the Port 1/LAN port via a hub or switch to the internal network. For this
purpose, use the RJ45 Ethernet cable provided. Note that your Administration PC
must also be connected to this network.
2. Connect Port 2/WAN to the external network. The connection to the WAN
depends on the type of Internet access.
Please note:
on XG 105(w)/115(w) the SFP port is shared with RJ45 Ethernet Port 4
and takes precendence over the RJ45 port in case you connect cables to both ports
at the same time.
The XG devices are shipped with the following default settings:
Ethernet Port
IP Address
Zone
1
172.16.16.16/255.255.255.0
LAN
2
DHCP
WAN
Admin Console Username
Admin Console Password
CLI Console Password
admin
admin
admin
Default Gateway
DNS proxy
DHCP service
DHCP
Enabled
Enabled
Mount the appliance to the rack
If you want to mount the device within a rack please use the optionally available
rackmount kit for this device.
Internet
e.g.,
DSL modem
Internal network
admin client PC
XG Appliance
Switch
Port 2/
WAN
Port 1/
LAN
Quick Start Guide
XG 105(w)/115(w)/125(w)/135(w) Rev. 3