2. Rack Installation
3. Appliance Rail Attachment
2
p
e
t
S
1
p
e
t
S
Mount the inner fixed chassis rails on the appliance using three M4 x 4 truss
head screws on each side.
Align the inner fixed chassis rails on the appliance with the fixed rack rails
attached to the rack. Carefully slide the appliance into the rack until you hear the
rails click into place. Push the appliance all the way back into the rack until it
stops. Secure the appliance in the rack using two
10-32 x 3/4" truss head screws. Attach the
screws to the center hole of each
three-hole tab.
(2) 10-32 x 3/4"
Screws
Outer fixed chassis rails
Inner fixed chassis rails
Locking tab
(3) M4 x 4
truss head screws
Inner fixed chassis rails
Outer fixed chassis rail
Locking tab
Inner fixed chassis rail
M6 x 12 flat head screws
(2 front and rear)
Telco style rack
Long fixed rack brackets (A)
Short fixed
rack brackets (B)
Fixed rack brackets "C"
Outer fixed chassis rails
M4 x 4 truss head screws
for rack brackets
"A" & "B"
(2 front and 2 rear)
(2) M4 x 4 truss head screws
for rack brackets "C"
Outer fixed chassis rail
Inner fixed chassis rail
Locking tab
M4 x 4 Screws
(2 front)
M4 x 4 Screws
(2 rear)
Outer fixed chassis rails
Medium fixed rack brackets (A)
Short fixed rack brackets (B)
1" of space
(2) cage nuts
(rear)
Outer fixed chassis rails
19" width rack
(2) cage nuts
(front)
(2) M5 x 12
flat head screws
The middle cage nut is for securing
the appliance in the rack.
*
(2) M5 x 12
flat head screws
Locate the two long fixed rack rails. Remove each inner rail by sliding it all the way
to the right and pressing the locking tab to release it. You will attach the inner rails
to the sides of the appliance in part 3, Appliance Rail
Attachment.
Locate the two long fixed rack rails. Remove each inner rail by sliding it all the
way to the right and pressing the locking tab to release it. You will attach the
inner rails to the
appliance in part 3,
Appliance Rail
Attachment.
Step 1 (2a: 19-inch width rack)
Attach the medium (A) and short (B) brackets to the outer fixed chassis rails.
Attach each short bracket by aligning the two holes at the back of the front bracket
with the two threaded holes at the front
of each chassis rail and securing
with M4 x 4 screws. Attach
each medium
bracket by aligning
the slots on the
bracket with the
threaded holes on
the chassis rail.
Adjust the medium brackets to suit the depth of the
rack. Secure using two M4 x 4 screws for each bracket.
Step 2 (2a: 19-inch width rack)
Insert a cage nut into each square hole (three in the front and two in the rear for
each rail). They click into place. Attach the rail/bracket assemblies to the rack using
two M6 x 12 flat head screws at the front and rear. The middle cage nut at the front
will be used later to secure the appliance in the
rack. Make sure rail/bracket assemblies
and screws are properly aligned
at the front and back
and are level in
height on the left
and right sides.
Step 3 (2a: 19-inch width rack)
Step 1 (2b: telco-style rack)
Attach the medium (A) and short (B) brackets to the telco-style rack. Mount the
short brackets in the front and the medium brackets in the back using two M6 x
12 flat head screws for the
top and bottom holes of
each bracket as shown.
Make sure the brackets are
aligned in the rack in the
front and back and are
level in height on the left
and right sides.
Step 2 (2b: telco-style rack)
Slide each of the outer fixed chassis rails into the left and right fixed brackets
and loosely secure them with four M4 x 4 truss head screws on each side (See
red dotted lines). Leave enough of the outer fixed rails extended in the front to
loosely attach the
threaded brackets (C)
to the outer fixed
rails using two
M4 x 4 truss
head screws
on each side
(See blue
dotted lines).
Once all four
screws are in
place, tighten each one to
secure the outer fixed chassis rails.
Step 3 (2b: telco-style rack)
