5. Control Panel
(1) Display
1.1
TIME:
Two modes which display the running time.
①
Time will count from 0:00 to
99:59 minutes.
②
To set a countdown timer, the range is between 5:00-99:00
minutes. When it reaches ‘00:00’, the machine will slowly stop and display ‘end’.
The machine will enter standby after five seconds.
1.2
“DISTANCE:
Two modes which display distance covered.
①
The number will
keep increasing from 0.0 to 99.9km. Once it reaches the maximum number, it will
reset and count again.
②
To set a countdown, select a number between 1-99km.
When the number reaches 0, the machine will slowly stop and display ‘end’. The
machine will enter standby after five seconds.
1.3
“CALORIES:
Two modes which display calories burnt.
①
The number will keep
increasing from 0 to 9999 cal. Once it reaches the maximum number, it will reset
and count again.
②
To set a countdown, select a number between 20-9990 kcal.
When the number reaches 0, the machine will slowly stop and display ‘end’. The
machine will enter standby after five seconds.
Note: The window will be
switched from DISTANCE
and
CALORIES cyclically, you can press ‘M’ to
switch between cyclic display mode and single display mode, while the
machine is running.
1.4
“SPEED:
Displays the current running speed – the range is between 0.5-6km/h.
The speed will increase/decrease by 0.1km each time you press ‘+’ or ‘-‘.
P1-P12 are displayed under the setting for automatic selection.
1.5 Once the treadmill starts, each window will be displayed cyclically every five seconds.
Press the ‘M’ button to switch between cyclic and single display mode.
-4-
