Sony ZV-E10, Help Manual

Page: 561 / 577

Help Guide
Interchangeable Lens Digital Camera
ZV-E10
On cleaning
Cleaning the lens
Do not use a cleaning solution containing organic solvents, such as thinner, or benzine.
When cleaning the lens surface, remove dust with a commercially available blower. In case of dust that sticks to the
surface, wipe it off with a soft cloth or tissue paper slightly moistened with lens cleaning solution. Wipe in a spiral
pattern from the center to the outside. Do not spray lens cleaning solution directly onto the lens surface.
Cleaning the camera body
Do not touch the parts of the product inside the lens mount, such as a lens signal contact. To clean inside the lens
mount, use a commercially available blower* to blow any dust off.
Cleaning the product surface
Clean the product surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To
prevent damage to the finish or casing:
Do not expose the product to chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent,
sunscreen or insecticide.
Do not touch the product with any of the above on your hand.
Do not leave the product in contact with rubber or vinyl for a long time.
Cleaning the monitor
If you wipe the monitor firmly using tissue paper, etc., the monitor may be scratched.
If the monitor becomes dirty with fingerprints or dust, gently remove the dust from the surface, and then clean the
monitor using soft cloth, etc.
5-028-017-12(2) Copyright 2021 Sony Corporation
Do not use a spray-type blower as doing so may cause a malfunction. *
561