![background image](http://html.mh-extra.com/html/sony/zs-rs80bt/zs-rs80bt_service-manual_1329725038.webp)
MHC-V02
REVISION HISTORY
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a diff erent page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note:
If you still see the original page, press the [Enter] key again.
Ver.
Date
Description of Revision
1.0
2019.03
New
SYS SET
2019/02/28 22:48:45 (GMT+09:00)