![background image](http://html.mh-extra.com/html/sony/zs-rs70bt/zs-rs70bt_service-manual_1329723005.webp)
ZS-RS70BT/RS70BTB
5
MODEL IDENTIFICATION
Distinguish the destination by referring to the model number label.
– Bottom view –
Model number label
Part No.
Model
Part No.
RS70BT: MX model
4-470-553-0
[]
RS70BTB: AEP and UK models
4-470-560-0
[]
RS70BT: E41 model
4-474-744-0
[]
RS70BT: E92 model
No Label
• Abbreviation
E41: Bolivian, Chilean, Paraguayan, Peruvian and
Uruguayan
models
E92: Venezuelan, Panamanian, Honduran, Guatemalan,
Colombian, Costa Ri-ca, Dominican, Ecuadorean and
El Salvador models
MX: Mexican
model
NOTE OF REPLACING THE Bluetooth MODULE OR
RC-S711 (NFC)
The Bluetooth module or the RC-S711 (NFC) cannot exchange
with single. Exchange at the same time the Bluetooth module and
the RC-S711 (NFC). And, when the Bluetooth module and the RC-
S711 (NFC) are exchanged, it is necessary to check that pairing is
performed normally.
Please perform checking of operations in the following procedure.
Note: Please be sure to initialize the pairing information after
checking pairing.
Necessary machinery and material
• NFC-compatible
smartphone
If the smartphone OS is Android 2.3.3 or later, but earlier than
Android 4.1, download and install the app “NFC Easy Connect”
on the smartphone.
Connecting method
Procedure:
1. Turn on the NFC function of the smartphone.
2. If the smartphone OS is Android 2.3.3 or later, but earlier than
Android 4.1, start the app “NFC Easy Connect” on the smart-
phone.
3. Press the [POWER] (Except AEP and UK models)/[OPER-
ATE] (AEP and UK models) button to turn the power on.
4. Press the [ PAIRING BLUETOOTH] button to select Blue-
tooth function.
5. Touch the N mark of unit with the smartphone.
Smartphone responds
(unit recognized)
6. When the Bluetooth connection is complete, the message “BT
AUDIO” appears.
BLUETOOTH
7. Start music playback on the smartphone, then adjust the vol-
ume, and checks that sound is outputted from the unit.
Bluetooth information initializing method
Procedure:
1. Press the [POWER] (Except AEP and UK models)/[OPER-
ATE] (AEP and UK models) button to turn the power on.
2. Press the [ PAIRING BLUETOOTH] button to select Blue-
tooth function.
3. Press and hold (about 2seconds) the [ERASE] button.
4. The message “BT RESET” appears on the liquid crystal dis-
play.
5. Press the [ENTER] button, and the message “BT RESET” is
blink.
6. The message “COMPLETE” appears and initialization is per-
formed, and release from this mode.
Summary of Contents for ZS-RS70BT
Page 79: ...MEMO ZS RS70BT RS70BTB 79 ...