- 16 -
" [ Line Scan ] ": Set between two scans.
" [ Full Scan ] ": Set 360 ° scanning.
Press the OPEN ( iris open + ) into the line scan . Move to the menu
item, press OPEN ( iris open + ) configuration values for the
corresponding menu item changes - > joystick up and down the
menu item to modify the configuration values - > press OPEN ( iris
open + ) confirm and save , press CLOSE ( aperture off - ) cancel the
setting .
Line scan number : Supports 16 -line scan .
Speed: the starting point , end point between two scanning speed
grades.
Duration: Turn the starting point or ending point after time spent on
this point .
Direction : Starting scanning direction .
Delete> : Delete section line scan .
Press the OPEN (iris open +) into the full scan. Move to the menu item,
press OPEN (iris open +) configuration values for the corresponding
menu item changes -> joystick up and down the menu item to modify
the configuration values -> press OPEN (iris open +) confirm and save,
press CLOSE (aperture off -) cancel the setting.
Scan number: total support for 8-round sweep.
Scan speed: Set 360 ° scan speed grade, a total of 64.
Scanning direction: the direction of scanning, clockwise, or
counterclockwise.
Set start point>: Set full scan start position, OPEN enter the
configuration starting point, joystick, so that camera movement to the
starting point, press OPEN (iris open +) to save the starting point.
Start>: Start section full scan will start from
Automatically exit the menu.
Delete>: Delete section line scan.
Run setup
[preset setup]
[region setup]
[cruise set]
[pttern Set]
[line scan]
[full scan]
Return
Exit
Line scan
Line scan no.<n>(16)
Speed:<n>(1-6level)
Direction:<
Clockwise>/Countercl
ockwise
Setup start point
Setup end point
Start
Delete
Return
exit
Run setup
[preset setup]
[region setup]
[cruise set]
[pttern Set]
[line scan]
[full scan]
Return
Exit
Full scan
Scan no.<n>(8)
Scan speed:<n level>(64 level)
Scan
direction:<clockwise>/<cunterclockwise>
Setup start point
Start
Delete
Return
exit
