IR PTZ DOME CAMERA
User Manual
※
Read this manual before using the camera
safety announcements
1.Careful transportation
Transport, storage and installation process, we need to prevent stress, severe vibration and damage to the product
immersion.
2. Be careful installation of dome camera modules
To be especially careful, light up-light down, do not force squeezing movement and the structural components, so as to
avoid the dome camera trouble. For security reason, do not cover the housing is not installed electricity.
3. Power, video cables and control cables
Power cables, video cables and control cables preferable to use shielded cable and is independent of routing, can not
blend together with other cables.
4. Electrical Safety
In use must comply with all electrical safety standards, the PTZ Dome Camera or signal transmission line should work with
high-voltage equipment or cables to maintain a sufficient distance (at least 50 meters), if necessary, do a good job against
lightning, surge and other safeguard procedures.
5. Cleaning
When cleaning the camera housing, please use the dry soft cloth. such as severe dirt, please use neutral cleaner gently
wipe. Do not use strong or with abrasive cleaner, so as not to scratch jacket, affecting image quality.
6. Please strictly sealed to prevent liquid splashing into the PTZ Dome Camera, otherwise it will result in permanent
damage to the device.
7. Do not use the camera when exceed the limits of temperature, humidity. Dome camera use temperature of -10
℃
to
50
℃
, humidity less than 90%.
8. Do not install the camera near the air-conditioned outlet.
Under such conditions, the lens would be fogging following the state of hydrometer.
By the opening and closing air-conditioner frequently caused the high and low temperature changed.
By the opening and closing door frequently caused the high and low temperature changed.
