Sony XTL-W7000, Installation/Connections Manual

Page: 17 / 48

17
Before attaching
• Remove the film antenna, which you
previously fastened temporarily in
place, before beginning these steps.
• Cover the dashboard with a cloth to
protect it from the water and detergent.
• Clean the front window well to remove
any dirt, oil, or anti-fogging agent
before beginning these steps.
3
Attach film antenna
qf
.
1 Using a spray bottle, wet the inside of the front window
well with a mild detergent solution. The optimal solution
is 500 ml of water with one or two drops of detergent.
(Pure water will not work well for making fine
adjustments.)
2 Remove the clear backing from the film antenna. Using
the spray bottle, wet the exposed surface well with the
mild detergent solution.
• Grasp the peel-off tab and peel the clear backing off
slowly.
• Do not remove the protective sheet from the other side
(the side that faces the inside of the car) yet. You will
remove that sheet in step 4.
• Take care not to get dirt or fingerprints on the exposed
surface of the film antenna.
3 Stick the film antenna to the front window.
When attaching the film antenna
• Position the antenna vertically by
aligning the upper edge of the antenna
with the lower edge of the ceramic line.
Position it horizontally by aligning the
edges with the marking (cellophane
tape, etc.) that you previously placed
on the window.
• Do not let the front window get dry as
you are working. Spray it again with
the detergent solution as needed.
• Until the front window dries, you can
slide the antenna to adjust its position.
• When you have the antenna positioned
where you want it, remove the
markings.
spray bottle
marking (cellophane
tape, etc.)
Peel-off tab
Align the upper edge of the
antenna with this line.
Marking
(cellophane
tape, etc.)