11
white
blue
SYNC
TP111
1
2
4
3
white
blue
SYNC
TP111
1
2
4
3
RGB Decoder FO Adjustment
Procedure:
1. Without INPUT1, INPUT2 inputs (no signal input mode), short
the jumper wire between TP100 and GND.
2. Connect a frequency counter to TP61.
3. Adjust VR6 so that reading on frequency counter is
4.433619 MHz ± 10 Hz.
4. Short the jumper wire between TP106 and GND.
5. Connect a frequency counter to TP61.
6. Confirm that reading on frequency counter is 3.579545 MHz ±
100 Hz.
7. After this adjustment, remove the jumper wires.
RGB Decoder Input Level Adjustment
Procedure:
1. Input signal : PAL EBU color bar (INPUT 1 VIDEO)
2. Adjust VR4 so that the white peak
1
(100% white) of
TP111 (B OUT) is at 1.0 Vp-p.
DL AMP & DAT Adjustment
Procedure:
1. Adjust DAT so as to minimize the variation between the level
2
and the level
3
of TP111.
2. Adjust VR5 so that the blue level
4
is at 1.0 Vp-p.
3. Set the input to NTSC, and confirm that the blue level
4
is at
1.0 ± 0.1 Vp-p.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
