45
Pin No.
Pin Name
I/O
Description
46
KEYIN0
I
Key input terminal (A/D input) (LSW901 to LSW912, S900)
TA, SOUND, D-BASS, MENU, DISC +,
. m
, LIST,
> M
, ENTER, DISC –, CLOSE,
OPEN,
Z
keys input
(LSW901 TA, LSW903 D-BASS: XR-M500R only)
47
KEYIN1
I
Key input terminal (A/D input) (LSW913 to LSW919, LSW921 to LSW925, S902)
6 to 3, SHUF 2, REP 1, AF, +, PTY DSPL (XR-M500R), DSPL (XR-M550), –, OFF, SOURCE,
MODE
o
keys input
(LSW919 AF: XR-M500R only)
48
RCIN0
I
Rotary remote commander key input terminal (A/D input)
49
NC
O
Not used (open)
50
QUALITY
I
Noise level detection signal input at SEEK mode (A/D input)
Used for the XR-M500R only (XR-M550: Not used open)
51
FMAGC
I
FM AGC detection signal input from the FM/AM tuner unit (TUX100) (A/D input)
52
MPTH
I
Multi-path detection signal input from the RDS decoder (IC700) (A/D input)
Used for the XR-M500R only (XR-M550: Not used open)
53
VSM
I
FM and AM signal meter voltage detection input from the FM/AM tuner unit (TUX100)
(A/D input)
54
VCC
—
Power supply terminal (+5V)
55
ST-BY
O
Standby on/off control signal output terminal “L”: standby mode, “H”: amplifier on
56
NS-MASK
O
Discharge control signal output for the noise detection circuit “H”: discharge
Used for the XR-M500R only (XR-M550: Not used open)
57
REEL
I
Rotation detect signal input from supply reel sensor and take-up reel sensor on the deck
mechanism
58
NC
I
Not used (fixed at “L”)
59
TAPE ON
O
Tape system power supply on/off control signal output terminal “H”: tape on
60
LM-EJ
O
Motor drive signal output to the loading/tape operation motor drive (IC400) “H” active
(For the eject direction and reverse side operation) *1
61
LM-LOD
O
Motor drive signal output to the loading/tape operation motor drive (IC400) “H” active
(For the loading direction and forward side operation) *1
62
CM ON
O
Capstan/reel motor (M901) drive signal output terminal “H”: motor on
63
VSS
—
Ground terminal
64
POS0
I
I
I
I
O
Not used (open)
I
Internal flash memory data write mode detection signal input terminal “L”: data write mode
Not used (pull up)
I/O
Two-way data I
2
C bus with the FM/AM tuner unit (TUX100), RDS decoder (IC700) and
electrical volume (IC100) (RDS decoder is XR-M500R only)
O
I
2
C bus clock signal output to the FM/AM tuner unit (TUX100), RDS decoder (IC700) and
electrical volume (IC100) (RDS decoder is XR-M500R only)
72
RCIN1
I
Rotary remote commander shift key input terminal
73
X1A
O
Sub system clock output terminal (32.768 kHz)
74
X0A
I
Sub system clock input terminal (32.768 kHz)
75
DAVN
I
Data transmit completed detection signal input from the RDS decoder (IC700) “H” active
Used for the XR-M500R only (XR-M550: Not used open)
76
CDON-IN
I
CD/MD on/off control signal input terminal (fixed at “L” in this set)
77
BU-IN
I
Battery detection signal input from the SONY bus interface (IC501) and battery detect circuit
“L” is input at low voltage
Tape position (EJECT/FF/REW/REV/
FWD mode) detect input from the tape
operation switch on the deck mechanism
POS0: “L”: EJECT mode, “H”: others mode
POS1: “L”: FF and FWD mode, “H”: others mode
POS2: “L”: REW mode, “H”: others mode
POS3: “L”: REV and EJECT mode, “H”: others mode
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
