14
Other Functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing
(SEL)
repeatedly.
Each time you press
(SEL)
, the item
changes as follows:
BAS (bass)
t
TRE (treble)
t
BAL (left-right)
t
FAD (front-rear)
2
Adjust the selected item by pressing
either side of the volume button.
Adjust within three seconds after selecting
the item.
Attenuating the sound
Press
(ATT)
.
After “ATT-ON” momentarily flashes, the
“ATT” indication appears in the display.
To restore the previous volume level, press
(ATT)
again.
“ATT-OFF” flashes momentarily.
Changing the sound and
display settings
The following items can be set:
•CT (Clock Time) (page 13).
•M.DSPL (Motion Display)
– the demonstration mode which appears
when the tape is ejected and no source is
selected (e.g., tuner is turned off).
•BEEP – to turn the beep sound on or off.
1
Press
(SEL)
.
2
Press the preset number button to select
the desired item.
Number buttons
(2)
: CT
(4)
: M.DSPL
(6)
: BEEP
Note
The displayed item will differ depending on the
source.
3
Press the preset number button
repeatedly to select the desired setting
(Example: ON or OFF).
