9
EN
Getting Started/Cassette Player
To locate
preceding tracks
To locate succeeding
tracks
Rewind
Fast-forward
Playing a tape in various
modes
You can play the tape in various modes:
•Intro (Intro Scan) lets you play the first 10
seconds of all the tracks.
•NR (Dolby NR) lets you select the Dolby
*
NR
B or C system.
•B. Skip (Blank Skip) skips blanks longer than
eight seconds.
•ATA (Automatic Tuner Activation) turns on
the tuner automatically while fast-winding
the tape.
•Repeat (Repeat Play) repeats the current
track.
*
Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation. ”DOLBY“ and the double-D
symbol
a
are trademarks of Dolby
Laboratories Licensing Corporation.
Searching for the desired track
— Intro scan
1
Press
(SHIFT)
.
Every time you press
(SHIFT)
, only the
items you can select light up.
2
Press
(4)
(PLAY MODE) repeatedly until
“Intro” appears.
Each time you press
(4)
(PLAY MODE),
the item changes as follows:
Intro
n
NR
n
B. Skip
n
ATA
3
Press
(5)
(
n
) to select “Intro on.”
Intro Scan starts.
4
Press
(SHIFT)
.
To go back to normal playback mode, select
“Intro off” in step 3 above.
A
SHIFT
1
2
3
4
5
6
7
8
9
1
SET UP PLAY MODE
REP
PLAY MODE
PLAY MODE
Fast-winding the tape
During playback, push the SEEK/AMS
control up or down and hold.
To start playback during fast-forwarding or
rewinding, press
(MODE)
.
Locating a specific track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, push the SEEK/AMS
control up or down momentarily.
Note
The AMS function may not work when:
— the blanks between tracks are shorter than
four seconds
— there is noise between tracks
— there are long sections of low volume or quiet
sections.
Changing the display item
Each time you press
(DSPL)
, the item changes
as follows:
z
Tape playback
z
Clock
MOTION DISPLAY
*
Z
*
All the items above are scrolled in the display
one by one in order.
