Sony XR-C7220R, Operating Instructions Manual

Page: 27 / 208

27
Labelling a CD
— Disc Memo
(For a CD unit with the custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name and select specific tracks for
playback (page 29).
1
During CD playback, press (PTY/LIST) for
two seconds.
2
Enter the characters.
1
Rotate the dial clockwise to select the
desired characters.
(A
n
B
n
C
n
··· Z
n
0
n
1
n
2
n
··· 9 n + n – n
*
n / n \ n > n <
n
.
n
_ )
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2
Press (5) ( n ) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press
(2)
( N ), the flashing cursor
moves to the left.
3
Repeat steps
1
and
2
to enter the
entire name.
3
To return to normal CD playback mode,
press
(PTY/LIST) for two seconds.
Tip
To erase or correct a name enter “_” (under-bar)
for each character.
DISC
DISC
DISC
Erasing tracks in a programme
1
Press (SHIFT) , then press (4) (PLAY
MODE) for two seconds.
If you have labelled the disc, the bank edit
mode appears. Press
(4)
(PLAY MODE) to
display “P” above.
2
Press (2) (
N
) or (5) (
n
) to select the
track you want to erase.
The track currently registered in slot 6.
3
Press (6) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
6
Press (SHIFT) .
Track slot number
µ
RLAY MODE ENTER
DISC TRACK
RLAY MODE ENTER
DISC TRACK
RLAY MODE ENTER
DISC TRACK
SET UP RLAY MODE ENTER
DISC TRACK